Johnson & Johnson Gallery

Johnson & Johnson.  This was one of the big four Operation Warp Speed vaccine companies funded with billions of US tax dollars by Donald Trump late in 2020 and further pushed by Joe Biden until he left office in January, 2025.

Since all governments of the world have been involved in this scam, numbers are hard to come by of actual deaths.  I found one site the other day, naturalnews.com, by Infowars contributor Mike Adams, that linked to a vaccine death report out of Japan on July 13, 2025.

He said on here that it could be around 600,000 to 610,000 Japanese people that were murdered by these shots out of 21 million vaccinated. Here’s the link:

Click here for Mike Adam’s report and links to the Japanese study.

Just doing the math on those numbers, the death rate from covid vaccines in Japan is 600,000 divided by 21,000,000.  That is a 2.86% kill rate!

Adams stated on one of his videos the other day on Brighteon that he has ran the numbers on how many were killed here in the United States.  Adams believes it is on the order of 1.58 million people.  I believe the number could be way higher than that.

Remember who you knew that died during the vaccine rollout.  I know zero people in my circle of family & friends that died of the covid-19 virus, but several who died within a few months of being vaccinated and some who were injured long term by the jabs.

Here’s another site link below that questions the official numbers of the CDC and other government agencies like NIH.  Remember these agencies had to lie to us to run this scam, so in all likelihood they put their thumbs on the scales as they did when they over-reported the death numbers from the initial virus to scare as many as possible.

This site is by Edward Dowd, an economist who used to be employed by Black Rock Investments.  He has had many of his social media accounts, YouTube channels and other sites taken down just like Mike Adams, myself and many others for resisting the vaccines.

Here’s his site with real US government numbers using the official vaccine injury reporting US government VAERs database and CDC’s own graphs (that they cover up with a huge popup you can’t close), here on his website titled theyliedpeopledied.com:

Click here for Edward Dowd’s report and link to his book.

My calculations when applying the death rate in Japan vs. the total population of around 123 million, yielded a number of 0.48% death rate (600,000 /123,360,000).  If that number is correct and we extrapolate it out to the entire world population of 8.23 billion, we’re talking about a number around 40 million killed globally!

When you factor in that these vaccines were used in every country in the world, these numbers, even if cut in half meaning only 20 million killed, leads to only one conclusion: THE COVID-19 VACCINATION PROGRAM IS THE GREATEST ACT OF GENOCIDE PERPETRATED ON HUMANITY EVER!!!

I reject nazi philosophies and fascism entirely, but at least you have to give Hitler one thing however insane he was: he only targeted a few groups of people, most of them Jews in Europe and the Russians whom he betrayed toward the end.

The Covid-19 vaccines targeted all people on planet earth, indiscriminately save the government officials and profiteers who were in on it.  I think the officials got inert saline solution in their jabs.  Why?  Because absolutely ZERO of them died from the vaccine.  You’d think with the huge numbers of citizens dying that at least a few would have died by now, but they’re all perfectly healthy even today.

I guess Hitler was too scary with all his open racism, so the vaccine manufacturers and all the governments of the world wanted to give you all an equal opportunity to die by lethal injection.

Equal opportunity suicide.  They respected your civil rights (except when it came to mask mandates and social distance) as they built coffins for you and your loved ones.

Since these maniacs probably were attempting to match the Fuhrer’s level of genocide and join him one day siempre junto in hell, I wondered what their logos would really look like without the subtle almost nazi logos in them?  To protest this genocide, I decided to make the nazi connection to the black pope and his Jesuit murder men extremely blatant as not many understand what is actually happening.

I included nazi symbols in all the ‘big four’ vaccine manufacturers funded by Trump and the US government and distributed not only here but all over the planet in one form or another.  The only other one I could find was the Sputnik vaccine by Russia dispersed by them to many other countries such as South Africa.

The thing I noticed during the ‘plandemic’ was that the 21st century governments are much bigger chickens & significantly more shivering in the knee caps than the original Jesuit trained national socialists like Hitler, Mussolini, Pinochet, Himmler, Goebbels and Mengele.

At least the 20th century fascists had the ‘decency’ to shoot your baby in the head and then shoot you next.  You knew they were there to kill you as their guns could be easily seen.  This made it easier to mount some sort of resistance however futile it may have been.

In the 21st century Jesuit genocide installment, your serial killers use their television and internet media intrigue machine.  They’re masters at cleverly crafting hypnotic CIA double talk with innocently raised eyebrows to seduce you into killing yourself.

But these killers today come in as your saviors, they’re wearing white lab coats to rescue you from the scary virus with their warp speeded lightly tested magical jabs.  They don’t have guns, they have ‘life saving’ medicines!  They get your consent first, then stab you in the back with one of them as you drop dead in a few days or months.

I thought it stupid of our new wannabe dictators at the time this lie was rolled out, because if their supplicant’s goal was to suck up to their masters and be a sniveling little boot licker they’d be the first ones to go!

All that would be left would be a bunch of angry and/or permanently injured people wanting to potentially hold the ones wearing the boots accountable.  That is what I think is starting to happen today.

So, enough numbers and exposure of the crimes for now, on to how this piece was created!

So, here’s the original logo for Johnson & Johnson.  If you remember this used to be the logo for J&J.  Now, in the last 2 years since I came up with the snakes logo, they changed it to a common type face.

You may not know who I am.  But isn’t it strange that whole companies who’s logos I redesign as parodies have changed their company names, like Twitter & facebook and many have changed their logos like Taco Bell?

I tried many different methods for coming up with this design used in my Johnson nazi Johnson logo.  First, I made this logo with some subtle snakes that looked like this piece above.  It was very boring and looked very close to the one above.  Here’s the result below:

I never liked the above design, so I decided to mess around with the snake image and make the whole logo into a snake.

I found a good image of a snake online and just attached it to a snake body following the contours of the original J&J logo, just without all the necks in it.

Mine had smoother curves.  I stopped working on it as this wasn’t turning out how I liked it, but it was a good start of where I wanted to go:

These photos above were a good start, but the problem I had was that I wanted to sculpt scales and a belly onto the snake.  This is non-trivial to do one by one or even by patterns.

I also decided on the watercolor splashes background around this time.  I took a few pages of watercolor paper outside and threw some really concentrated red and dark red paint at them.  The background for the snakes took several attempts until I got one that looked right in its current orientation.

Then I extracted them from the paper backgrounds using Gimp Shop and put them all together in one file.  They look currently blurry, but one day I’d like to really make them crisp and blend together better.  I still have the large file, so this is a future endeavor if I can do it.

I like how they look currently as blurry because that looks better with the super detailed snakes.  Maybe it doesn’t need to be changed as it contrasts well and puts the focus on the snakes rather than the background.  I did the background this way to make it look like blood was exploding from everywhere, which is what is happening inside your body when these serpents are released inside your veins.

I found a guy that had a brush plugin online, but it was made for a different program.  I went into the deeper parts in the code and files of this brush and found it was simply a pattern applied to a 3D path.

I was able to extract the brush pattern from the file and use it in Blender.  I used a path tool and made the design for the left Johnson first snake.

It was pretty much like the brush I had, so I only needed to sculpt very little on it.  Of course the eye had to be changed, but the pattern was pretty much what I used.

The second snake was heavily modified from the snake brush I exported to Blender and I basically had to remove the bottom mouth and resculpt it while changing the pattern.

I studied quite a few pictures of snakes bearing their fangs like rattlesnakes and many other snakes like black mambas and other poisonous snakes.

The striking snake was the most difficult snake to make and took the most time.  A snake’s head distorts quite significantly while striking and its eyes even change, so everything had to be distorted to achieve the correct effects.

Also in the end I had to render it in two pieces as the body and as the head, then splice them together without moving the position of each snake.

The other problem I had was how to make the snakes look like they were coming out of the page.  I had to make several paths without sucess until I learned that the way to make it look like I wanted was to make the snake longer where it’s coming out of the page.

Perspective rules were added and all kinds of nodes for reflectiveness, opacity and color were added to make the snakes look like clotted blood.

Why clotted blood?  Because that’s what the covid shots did, made clots in people’s veins and arteries.  Many funeral directors and embalmers have witnessed these rubbery yellowish bioengineered clots that had to be removed from people’s veins otherwise the embalming fluid wouldn’t traverse the entire circulatory system.

I saw one funeral director that testified he never saw these types of clots until very late 2020 after the covid vaccines were rolled out.  One study I read recently said these clots test as amyloids.  Vaccines have spike proteins and mRNA technology.  Amyloids are just a collection of jumbled up proteins.

So, here’s some quick renders I did of different angles of the finished sculptures.  The pill was trivial to do as all I had to do was create a cylindrical shape with rounded caps and make points for the nazi logo and then extrude it into the pill.  So, here are the quick renders of what this looks like from different angles: